20 x 30 x 1 Filtrete Elite Allergen Reduction Filter - EA22DC-6

3M EA22DC-6 | Our#: 176677
6 pack

20 x 30 x 1 Filtrete Elite Allergen Reduction Filter - EA22DC-6. 3M Performance Rating = 2200 . Highest performance for Filtrete 1" filters.

  • MERV 13 Rated
  • Change Every 3 Months
  • 20x30x1" Nominal
  • 19¾x29¾x⅞" Actual
$153.30 $198.99
Case of 6 Filters, $25.55 ea
In Stock
Ships Monday, Jan. 21st
Est. Delivery By Jan. 28th

20" X 30" X 1"  Filtrete® Elite Allergen Reduction Filter from 3M - #EA22DC-6 Pack

The Filtrete® Elite Allergen Reduction Filter carries a 3M Microparticle Performance Rating (MPR) of 2200 - roughly equivalent to a MERV 13 rating


  • Meets the American Lung Association® Health House® Indoor Air Quality Guidelines
  • No unnecessary antimicrobial chemicals added; Filtrete filtering material will not support the growth of bacteria, mold, mildew or fungi in normal use
  • Contains electrostatically charged media to filter and attract particles in the air

94% effective at capturing large allergens like:

  • Pollen
  • Mold spores 
  • Dust mite debris

Attracts and captures microscopic allergens like:

  • Smoke
  • Pet dander
  • Household dust
  • Smog
  • Bacteria
  • Particles that carry viruses
  • Particles that can carry odors

* This filter should be changed at least every 3 months.  Certain conditions in your home will significantly add particles to the air - this will cause the filter to capture more particles, shortening it's life to less than 3 months.  These conditions would include: dirty ductwork, pets, construction work, sanding projects, tobacco smoke, burning candles, fireplaces and wood-burning stoves.


The  Heating, Ventilating and Air Conditioning (HVAC) industry uses the ASHRAE 52.2 Standard, which assigns a Minimum Efficiency Reporting Value (MERV) to a filter. One part of MERV reports a filter's ability to capture medium to large particles between 1 and 10 microns. This value is helpful in comparing the performance of different filters but it is not adequate alone because particles greater than one micron make up only about 1% of the contaminants in your indoor air.

Another part of MERV addresses submicron particles. 3M calls this the MPR or Microparticle Performance Rating. It measures a filter's ability to capture particles between 0.3 and 1.0 micron. Based on independent laboratory tests, 3M's MPR measures a filter's ability to capture submicron particles that make up 99% of the particles in the air, such as bacteria, smoke and smog.